Mallory-ignition Mallory EZ TRIGGER 6200M Manuel d'utilisateur télécharger pdf

EZ TRIGGER

STEP 1

Locate a convenient position for the EZ Trigger away

from any high heat source such as the exhaust.

Mount the EZ Trigger using the supplied screw or

equivalent.

STEP 2

Leave all existing wiring in place on the stock coil,

except route the coil wire to the coil tower on the

new EZ Trigger instead of the distributor.

STEP 3

Connect the trigger wire for your Mallory HyFire

Ignition or other aftermarket ignition to the “ + ”

terminal on the EZ Trigger.

FORM 1612 05/04

STEP 4

Connect the “ – ” terminal to ground.

STEP 5

Connect the balance of the ignition wiring as called

out in the ignition’s instructions. Install your second

coil as instructed and route it’s coil wire to the

distributor.

STEP 6

Recheck all connections before starting the engine.

INSTALLATION INSTRUCTIONS

www.mrgasket.com 1

MALLORY IS A DIVISION OF THE MR. GASKET PERFORMANCE GROUP

10601 MEMPHIS AVE. #12, CLEVELAND, OH 44144

216.688.8300 FAX 216.688.8306

FORM 1612

05/04

Made in U.S.A.

Printed in U.S.A.

EZ TRIGGER ALLOWS THE STOCK COIL TO SEND ALL

NECESSARY INFORMATION TO THE VEHICLE’S ECU.

EZ TRIGGER 1

Résumé du contenu

Page 1 - EZ TRIGGER

EZ TRIGGERSTEP 1Locate a convenient position for the EZ Trigger awayfrom any high heat source such as the exhaust.Mount the EZ Trigger using the suppl

Commentaires sur ces manuels

Pas de commentaire

Mallory-ignition Mallory EZ TRIGGER 6200M Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Mallory-ignition Mallory EZ TRIGGER 6200M. Mallory Ignition Mallory EZ TRIGGER 6200M User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Mallory-ignition Mallory EZ TRIGGER 6200M